Rubber Processing Analyzer RPA2025 is specially designed for tire industry, rubber part factories, raw materials, petrochemicals, military industry and institutes in polymers and new material R&D, production process control to test rubber raw material, uncured rubber, curable rubber and some thermosetting materials by use of the die cavity with its oscillating frequency, shearing strain and temperature in wide range changing to determine their dynamic properties before cure, curability and physical properties post cure by one piece of rubber sample through sub-tests set by users, which test methods are in complied to ASTM D5289, ASTM D6204 and ASTM D6601, as well as other international standards.
規格與參數Data & Specification;
國際標準 Standards
符合ASTM D5289, D6204, D6601及其他有關國際標準
Complied to ASTM D5289, D6204, D6601, etc.
模腔形式 Die Cavity
密封雙圓錐形模腔，下模腔作往復振蕩
Sealed By-conical, the Lower Die oscillating
扭矩測量 Torque Meas.
扭矩傳感器, 安裝于上模腔
Torque Transducer mounted on the Upper Die.
驅動系統 Driving System
直驅伺服驅動
DDR Driving System
振蕩頻率范圍 Frequency Range
0.01~50.00Hz
振蕩振幅范圍 Amplitude Range
±0.005°~ ±90.000° (±0.070% ~±1256.000%)
扭矩范圍 Torque Range
0.010 ~230.000 dNm；
溫控范圍 Temperature Range
室溫~230.00°C±0.3°C
試樣體積 Sample Volume
約Appr. 4.5cm3
子測試形態 Sub-tests
硫化試驗、預熱、頻率掃描、應變掃描、變溫硫化、…
Cure, Time, Frequency Sweep, Stain Sweep, Temperature Variation…
